ESCAB Disconnection Modules 10Pairs
Material and package:
Plastic components PBT(UL94V-0) or ABS(UL-94V-0)
Contact material Phosphor bronze(Qsn6.5-0.1)
Contact plating Silver plating 5u “
Specification 10 pairs
Applications:
Superior high speed data and voice cross connect modules. Available in 8 and 10 pair disconnect versions. These modules
enable high speed LAN and WAN systems maximum headroom in transmission performance.
Suitable for use in all xDSL circuits
Robust long-term environmental stability allows both indoor and outdoor installation.
This is proven technology which has become the ‘industry standard’ in most countries.
The gas tight contacts ensure avalaible and long lasting connection.
These modules can be either patched, jumped and used in a patch by exception
configuration.
Description
ESCAB Disconnection Modules 10pairs
Order information: EC3-10P-DCON.
Technical Document
Technical Specification
Environment:
Environment condition (-40C to +90C)
Operation condition (-20C to +80C)
Atmospheric pressure 70-106KPa
Relative humidity <85% (30°C)
Mechanical Specifications
Pulling-out force ≥25N
Diameter of connection wire 22AWG-26AWG (0.4-0.65mm)
Insulation resistance ≥10GΩ
Intermediate resistance between the reed terminators ≤3mΩ
Contact resistance ≤1mΩ
Dielectric strength 2 kVeff
Impulse voltage resistance 3.6kV(8/20)
Operating voltage for basic insulation 210Vdc, 150VeffTNV
Pollution class II
Insulation material class I
Transient over-voltage for basic insulation 2.5kV
Current carrying capacity ,disconnection module, connection module 10kA / 5kA
IDC re-termination ≥200 cycles
Number of test cord insertions ≥750
Transmission performance ≥TIA 568B CATEGORY 5
