Category. 7A SFTP High performance PVC LSZH PE
• ISO/I EC11801:2002
• ISO/I EC61156-5
• EN50173-1:2002
• EN50288-2-1
• ANSI/TIA/EIA568B.2:2002
Product approved: UL Listed, ETL verified
Application:
All Ethernet applications which includes
10 Base T (IEEE 802.3)
100 Base T (IEEE 802.3U)
100 Vg-Any LAN (IEEE 802.12)
Token ring (IEEE 805.5)
TP-PMD (ANSI X3T9.5), ATM 155
10G BASE-T Gigabit Ethernet
Voice, Data, CATV & All sharing application up to 600 MHz
Description
ESCAB Category 7A SFTP High performance standard
Order information:
| P/N Ref | Size | Description |
| E7A10-SD12 | 4 x 2 x23AWG/1 | ESCAB Category 7A SFTP 600MHz Standard performance LSHF Orange color – 1000m/reel |
| E7A10-SD13 | 4 x 2 x23AWG/1 | ESCAB Category 7A SFTP 600MHz Standard performance PE Dark Blue color – 1000m/reel |
| E7A10-HP12 | 4 x 2 x23AWG/1 | ESCAB Category 7A SFTP 1000MHz High performance standard LSHF Orange color – 1000m/reel |
| E7A10-HP13 | 4 x 2 x23AWG/1 | ESCAB Category 7A SFTP 1000MHz High performance standard PE Dark Blue color – 1000m/reel |
Technical Document
Technical Specification
Standard: (LSHF | Low Smoke Halogen Frees)
Smoke Density: TS/BS/IEC/EN 61034-1+2
Corrosive Gases Measurement: IEC 60754-2 , BS/EN 50267
Flame retardant: IEC 60332-1, IEC 60332-2
Construction:
Conductor: Electronic solid copper 23AWG solid
Insulation: High-density polyethylene (HDPE)
AL-Pet tape 100% coverage each pair
Tinned copper drain wire 28AWG
Outer sheath: LSZH Low Smoke Zero Halogen (UL-CMP)– Blue color.
Technical Properties (@ 20C):
Temperature: -200C ~ +750C
Minimum Bending Radius: 8 x Diameter
Maximum tensile load: 100N (installation)
Electrical Characteristics (@200C):
Conductor Resistance: Max 9.38 Ohm/Km
Conductor Resistance Unbalance: Max 2%
Dielectric Strength: 1.5kV dc or 1.0kV ac for 1 min
Spark test: 2000 +/- 250V AC
Operation voltage 80V (max 120V for 23AWG)
Insulation Resistance: >5000 MOhm @ 100-500 V test voltage
Capacitance Nom 42pF/m
Capacitance Unbalance to Earth: Max 160 pF/100m
Velocity of propagation 78-80%
Skew: 25nsec/100m @100MHz
Characteristic Impedance: 100 Ω +/- 3 Ohm @ 100MHz
Transfer Impedance: 30mΩ/m@10MHz (ISO61156 grade 2)
Propagation delay: 430nsec/100m @100MHz (NVP 78-80%)
