Keystone Jack Cat.6 UTP
Features:
Higher port density
Suitable for mounting into floor boxes directly.
Performance conforms to ANSI/TIA-568-C.2, ISO/IEC 11801 and EN50173-1 Category 6 specification -1
Support T568 A&B wiring & easy installation.
Offers total solution of your local area networking.
IDC type connector can accept 22-24 AWG solid and stranded cables.
Terminate using 110 or krone tools.
RoHS compliant
Applications:
10Base-T/100Base-TX/100Base-T4/1000Base-T
CENELEC EN 50173-1
ATM-25/ATM-51/ATM-155/100VG-AnyLan
TR-4/TR-16 Active/TR16 Passive
Typical Specifications:
Cat.6 180 / 90° Unshielded Shuttered Keystone Jack has been designed to meet the needs of both the professional installer and end user, and supports for 568A and 568B wiring schemes. Use for 110 or Krone termination tools. The 8 Pin insert has good flexibility and abrasion resistance.
Higher port density
Suitable for mounting into floor boxes directly.
Performance conforms to ANSI/TIA-568-C.2, ISO/IEC 11801 and EN50173-1 Category 6 specification -1
Support T568 A&B wiring & easy installation.
Offers total solution of your local area networking.
IDC type connector can accept 22-24 AWG solid and stranded cables.
Terminate using 110 or krone tools.
RoHS compliant
Applications:
10Base-T/100Base-TX/100Base-T4/1000Base-T
CENELEC EN 50173-1
ATM-25/ATM-51/ATM-155/100VG-AnyLan
TR-4/TR-16 Active/TR16 Passive
Typical Specifications:
Cat.6 180 / 90° Unshielded Shuttered Keystone Jack has been designed to meet the needs of both the professional installer and end user, and supports for 568A and 568B wiring schemes. Use for 110 or Krone termination tools. The 8 Pin insert has good flexibility and abrasion resistance.
Part Number Ref:ES-C6-U180-T2
CATEGORY:
Copper cabling system
Description
Order information:
| P/N Ref. | Type | Description | Packing |
| ES-C6-U90-T1 | Cat.6 90° Unshielded RJ45 | 90° Super Category 6 Unshielded Keystone Jack, support up to 250MHz |
1pc/unit |
| ES-C6-U180-T2 | Cat.6 180° Unshielded RJ45 | 180° Super Category 6 Unshielded Keystone Jack, support up to 25oMHz |
1pc/unit |
Technical Document
Technical Specification
Electrical Specifications:
Dielectric Strength: 1000V RMS for 1min
Insulation Resistance: 500.Mohm min
Contact Resistance: 20mΩ per contact
Current rating: 1.5A @200C
Temperature range: -100C to +750C
Humidity: 10% – 65%
Physical Specifications:
PC housing material
Flame retardant UL 94V-0
IDC contact: 100u inch nickel plated over phosphorbronze
IDC operating life: minimum 250 re-terminations
Jack contact: Phosphor bronze, 50μ inch gold plating over nickel plating in contact area
Jack operating life: minimum 1000 insertions
PCB: FR-4
Reference Certified:
UL/cUL Listed ; ETL verified by manufactured
