Category 6A U/FTP High performance PVC LSZH PE
ANSI/TIA 568-C.2
ISO/IEC 11801 ED.2
CENELEC EN 50173-1,2
CENELEC EN 50288-10-1
IEC 60332-1, IEC 61165-5
Approved: UL Listed, ETL Verified
Application:
Smart Television communication, Internet system in home.
Camera security IP system
Telephone system, Smart home system
500 MHz data for 10 Base-T, 100 Base-T, 1000 Base-T, ATM 155 and FDDI. (IEEE 802.3) ; TP-PMD (ANSI X3T9.5)
10Gbit/s Ethernet ; 100Mbps CDDI
Power over Ethernet (PoE) / PoE+
Description
ESCAB Category 6A F/UTP 500MHz High performance standard PVC LSHF or PE
Order information:
| P/N Ref | Size | Description |
| E6A10-SD01 | 4 x 2 x 23AWG/1 | ESCAB Category 6A U/FTP HPS 500MHz PVC – Blue color – 500m/reel |
| E6A10-HP12 | 4 x 2 x 23AWG/1 | ESCAB Category 6A U/FTP HPS 500MHz LSHF – Blue color – 500m/reel |
| E6A10-HP13 | 4 x 2 x 23AWG/1 | ESCAB Category 6A U/FTP HPS 500MHz PE – Black color – 500m/reel |
Technical Document
Technical Specification
Construction:
Conductor: Electronic solid copper 23AWG solid
Insulation: High-density polyethylene (HDPE)
AL-Pet tape 100% coverage each pair
Tinned copper drain wire 28AWG
Outer sheath: LSZH Low Smoke Zero Halogen (UL-CMP)– Blue color
Standard: (LSHF | Low Smoke Halogen Frees)
Smoke Density: TS/BS/IEC/EN 61034-1+2
Corrosive Gases Measurement: IEC 60754-2 , BS/EN 50267
Flame retardant: IEC 60332-1, IEC 60332-2
Electrical Characteristics (@20C):
Conductor Resistance: Max 9.38 Ohm/Km
Conductor Resistance Unbalance: Max 2%
Dielectric Strength: 1.5kV dc or 1.0kV ac for 1 min
Spark test: 2000 +/- 250V AC
Operation voltage 80V (max 120V for 23AWG)
Insulation Resistance: >5000 MOhm @ 100-500 V test voltage
Capacitance Nom 42pF/m
Capacitance Unbalance to Earth: Max 160 pF/100m
Velocity of propagation 78-80%
Skew: 25nsec/100m @100MHz
Characteristic Impedance: 100 Ω +/- 3 Ohm @ 100MHz
Transfer Impedance: 30mΩ/m@10MHz (ISO61156 grade 2)
Propagation delay: 430nsec/100m @100MHz (NVP 78-80%)
Technical Properties (@ 20C)
Temperature: -20degreeC ~ +75degreeC
Minimum Bending Radius: 8 x Diameter
Maximum tensile load: 100N (installation)
