Category 5e UTP 100MHz Multi-pairs PVC LSZH
Features:
ANSI/TIA/EIA 568.B2-CAT5
CENELEC EN 50288 ; EN 50173 class D
IEC 61156-5 CAT5
ISO/IEC11801 CLASS D
IEC 60332-1-2
(*) We Implemented RoHS Compliance for the Requirement of European Union Issued Directive 2002/95/EC.
Application:
Exceptional 100-Ohm series cables for both analog and digital services.
Voice data, Ethernet protocol 100MHz.
This cable is used in indoor installations, telephone exchanges and subscriber distributions, signal and data transmission.
ANSI/TIA/EIA 568.B2-CAT5
CENELEC EN 50288 ; EN 50173 class D
IEC 61156-5 CAT5
ISO/IEC11801 CLASS D
IEC 60332-1-2
(*) We Implemented RoHS Compliance for the Requirement of European Union Issued Directive 2002/95/EC.
Application:
Exceptional 100-Ohm series cables for both analog and digital services.
Voice data, Ethernet protocol 100MHz.
This cable is used in indoor installations, telephone exchanges and subscriber distributions, signal and data transmission.
Part Number Ref:EC5U025P-01
CATEGORY:
Copper Cables
Description
Category 5e UTP 100MHz Multi-pairs PVC or LSHF
Order information:
| P/N Ref | Size | Description |
| EC5U025P-01 | 25 x 2 x 24AWG | Escab Category 5e UTP Multi-pairs 100MHz PVC – 1000m/reel |
| EC5U025P-11 | 25 x 2 x 24AWG | Escab Category 5e UTP Multi-pairs 100MHz LSHF – 1000m/reel |
| EC5U050P-01 | 50 x 2 x 24AWG | Escab Category 5e UTP Multi-pairs 100MHz PVC – 1000m/reel |
| EC5U050P-11 | 50 x 2 x 24AWG | Escab Category 5e UTP Multi-pairs 100MHz LSHF – 1000m/reel |
Technical Document
Technical Specification
Electrical Specifications:
Impedance 100 Ohm +/- 15 Ohm
DC conductor resistance(max) 94 ohm/Km
Voltage test DC 1500 V/min
Minimum Insulation Resistance 1500 M.Ohm.Km @200C
Mutual capacitance at frequency 5.6 nF/100m @1KHz
Nominal velocity propagation 68%
Operation Voltage (max) 80V
Cables Construction:
Conductor: 24AWG Solid Bare copper
Insulation PE – with color following TIA 568 colour code.
Core type Twisted pair cables
Outer sheath PVC or LSHF flame retardant | Grey color.
Operation Specifications:
Minimum bending radius 10 x D (mm)
Operating Temperature -30degreeC to + 70degreeC
